This troubleshooting guide is designed to help you diagnose and resolve issues with your Igloo Self-Cleaning Countertop Ice Maker (Model IGLICEBSC26). Follow the steps outlined in each section to troubleshoot common problems. If the issue persists, consult the Igloo Customer Support for further assistance.

#contacting-customer-support↗

Troubleshooting – Igloo Self-Cleaning and Transportable Countertop Ice Maker IGLICEBSC26

Add Water Indicator

If the Add Water Indicator comes on, try the following steps:

1. Turn Off the Unit:
   • Power off the ice maker.
2. Add Water:
   • Fill the water reservoir to the required level.
3. Restart the Unit:
   • Press the POWER button again to restart the unit.
4. Check for Excess Ice:
   • If there is too much ice, turn off the ice maker and remove some ice from the Ice Basket.

Ice Cubes Stick Together

If ice cubes are sticking together, consider the following solutions:

1. Check Ice Cycle Duration:
   • The ice cycle may be too long. Stop the ice maker and restart it when the ice cubes melt.
   • Select the smaller-sized ice cubes using the SELECT button.
2. Water Temperature:
   • The water temperature in the water reservoir may be too low. Replace the water in the water reservoir with water at a suitable temperature.
   • Ensure the room temperature is set between 45°F and 90°F.

Ice Maker Not Working

If the ice-making cycle seems to be running properly but no ice is being made, try the following steps:

1. Check Ambient and Water Temperature:
   • The ambient temperature or water temperature in the water reservoir may be too high. The unit must be in an environment below 90°F.
   • Pour colder water (between 45°F and 90°F) into the water reservoir.
2. Inspect for Refrigerant Issues:
   • If changing the water or allowing the unit to cool does not resolve the issue, there may be a leakage of the refrigerant fluid, or a pipe in the cooling system may be blocked. In such cases, professional repair is required.

LED Lights

If the LED lights on the control panel are blinking, follow these steps:

1. Disruption in Power Source:
   • Press the POWER button to stop the ice-making cycle.
2. Allow Ice to Fall:
   • Let the ice maker sit for several minutes to warm up and allow ice to fall from the evaporator fingers.
3. Empty the Water Tray:
   • Empty the water tray.
4. Restart the Unit:
   • Wait three minutes before restarting the unit.

Cleaning and Maintenance Guide for Igloo Self-Cleaning Countertop Ice Maker

Regular cleaning and maintenance of your Igloo Self-Cleaning Countertop Ice Maker will help ensure its optimal performance and longevity. This guide will walk you through the steps to properly clean and maintain your ice maker, including both automatic and manual cleaning processes.

Cleaning the Ice Maker

Step 1: Remove the Ice Basket

1. Take out the ice basket from the ice maker.
2. Drain any leftover water by unplugging the Water Drain Plug located at the bottom of the unit.
3. Replace the Water Drain Plug after draining.

Preparing Cleaning Solutions

Common Cleaning Solutions

Prepare one of the following cleaning solutions:

• Vinegar and Water: Mix in a 1:1 ratio.
• Lemon and Water: Mix in a 1:1 ratio.
• Bleach and Water: Mix 1 teaspoon of bleach with 2 quarts of water.
• Commercial Ice Maker Descaling and Cleaning Solution: Follow the manufacturer’s instructions.

Running the Automatic Cleaning Cycle

Step 2: Add Cleaning Solution

1. Ensure the unit is plugged in and the POWER indicator light is off.
2. Add the prepared cleaning solution to the Water Reservoir.

Step 3: Start the Cleaning Cycle

1. Press the SELECT button until the CLEAN indicator light is illuminated.
2. The unit will automatically cycle the cleaning solution 5 times.

Step 4: Drain the Cleaning Solution

1. Once the cleaning cycles are complete, drain the interior water by unplugging the Water Drain Plug at the bottom of the unit.
2. Replace the Water Drain Plug after draining.

Manual Cleaning

Step 5: Clean the Interior and Exterior

1. Use warm, soapy water and a non-abrasive towel to clean the interior and exterior of the unit.
2. Ensure all surfaces are thoroughly cleaned and any residue is removed.

Step 6: Final Rinse and Dry

1. Drain any remaining water by unplugging the Water Drain Plug at the bottom of the unit.
2. Dry the interior with a non-abrasive towel.
3. Replace the Water Drain Plug after drying.

Storage Tips

Step 7: Prepare for Storage

1. Before storing, keep the Clear Lid open and allow the unit to dry completely for 24 hours.
2. Ensure the unit is completely dry to prevent mold and mildew growth during storage.

Igloo Self-Cleaning Countertop Ice Maker IGLICEBSC26 – Specifications

Igloo Transportable Countertop Ice Maker Operation Guide

Before First Use

1. Clean the Unit:
   • Follow the steps outlined in the Cleaning & Maintenance Guide before using the unit for the first time.
2. Positioning the Unit:
   • Place the ice maker on a flat, level surface.
   • Ensure the location is protected from direct sunlight and other sources of heat (e.g., stove, furnace, radiator).
   • Leave at least four inches of empty space on all sides of the unit.
3. Settling Time:
   • Allow one hour for the refrigerant fluid to settle before plugging the cord into an electrical outlet for the first time.

Using Your Ice Cube Maker

1. Preparing the Unit:
   • Open the Clear Lid.
   • Remove the Ice Basket.
   • Pour water into the Water Reservoir, keeping the water level below the MAX level mark.
   • If water levels exceed the MAX level mark, drain any excess water by removing the Water Drain Plug.
2. Starting the Ice-Making Cycle:
   • Press the POWER button on the LED Control Panel to begin the ice-making cycle.
   • Select the desired size of the ice cubes by pressing the SELECT button.
   • If the room temperature is lower than 60°F (16°C), it is recommended to select the small-sized ice cubes to prevent them from sticking together.
3. Ice-Making Cycle Duration:
   • Each ice-making cycle lasts between 6 to 15 minutes, depending on the selected ice cube size and the ambient room temperature.
   • In extremely hot temperatures, the ice-making time may vary considerably.
4. Monitoring Water Levels:
   • Periodically check the water level while the ice maker is in operation.
   • If the water pump is unable to pump water, the unit will stop automatically, and the Add Water light will illuminate.
   • If the water level is low, press the POWER button to turn the unit off, fill the water up to the MAX level mark, and press the POWER button again to restart the unit.
5. Full Ice Basket:
   • The unit will automatically stop working when the Ice Basket is full, and the ICE FULL light will illuminate.